Front Grille Cover Replacement (2-Door)

Front Grille Cover Replacement

2-door

NOTE: Take care not to scratch the front grille and the body.

1. Remove the front grille cover (A).
-1 Remove the clips (B, C).
-2 Pass both hood edge cushions (D) through the holes in the cover by pulling the rear edge of the cover up, and slide the entire cover rearward to release the front edge of it from under the front grille (E).
-3 Pass the hood latch handle (F) through the hole in the cover.
-3 NOTE: To remove the clips, pry the inner clip pins up at the edge near the line (G) on the clip heads.

2. Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.