Ignition Switch: Testing and Inspection

Ignition Switch Test

SRS components are located in the area. Review the SRS component locations 4-door, SRS Component Location Index (4-Door) 2-door, SRS Component Location Index (2-Door) and precautions and procedures Technician Safety Information before doing repairs or servicing.

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the steering column covers. Service and Repair

3. Disconnect the 5P connector (A) from the ignition switch (B).






4. Check for continuity between the terminals in each switch position according to the table.

5. If the continuity is not as specified, replace the ignition switch. Ignition Switch Replacement

6. Do the battery terminal reconnection procedure. Procedures