Fluid Line/Hose: Service and Repair

ATF Cooler Hose Replacement

Exploded View





NOTE: When installing the hose clamps, make sure not to interfere to the surrounding parts.

1. Install the ATF cooler hoses over the ATF cooler lines with the clips at appropriate points in reference to the following list. Align the pink paint mark (J) to the upside, and the white paint mark (K) to the downside.





2. Secure the ATF cooler hose with the clamp (M) at the pink paint line (N).

3. Refill the transmission with ATF to the proper level. ATF Level Check