Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2009 >> Accord V6-3.5L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement




Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure. Procedures

2. Raise the vehicle on the lift.

3. Remove the splash shield. Engine Removal

4. Disconnect the A/C condenser fan motor connector (A) and remove the harness clamp (B).

5. Loosen the A/C condenser fan shroud mounting bolts (C).

6. Lower the vehicle on the lift.






7. Remove the A/C condenser fan shroud assembly (A) and the coolant reservoir (B).






8. Remove the drive belt. Drive Belt Replacement (J35Z2 Engine)

9. Disconnect the alternator connector (A) and the positive alternator cable (B) from the alternator.

10. Remove the harness clamp (C) from the alternator and disconnect the A/C compressor clutch connector (D) from the A/C compressor.

11. Remove the bolt (E) securing the harness holder.






12. Remove the mounting bolt (A) and the alternator bracket mounting bolt (B), then remove the alternator.






Installation

1. Install the alternator, then tighten the mounting bolt (A) and the alternator bracket mounting bolt (B).






2. Install the bolt (A) securing the harness holder.

3. Install the harness clamp (B) to the alternator and connect the A/C compressor clutch connector (C) to the A/C compressor.

4. Connect the alternator connector (D) and the positive alternator cable (E) to the alternator. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.

5. Install the drive belt. Drive Belt Replacement (J35Z2 Engine)






6. Install the A/C condenser fan shroud assembly (A) and the coolant reservoir (B).






7. Raise the vehicle on the lift.

8. Tighten the A/C compressor fan shroud mounting bolts (A).

9. Connect the A/C condenser fan motor connector (B) and install the harness clamp (C).

10. Install the splash shield. Engine Installation

11. Lower the vehicle on the lift.

12. Do the battery terminal reconnection procedure. Procedures





pro multis · About Operation CHARM