Power Mirrors (Front Passengers Power Window Switch) Input Test

Power Mirrors (Front Passenger's Power Window Switch) Input Test

1. Turn the ignition switch to LOCK (0), open and close the driver's door, then remove the front passenger's (passenger's) power window switch.

- 4-door Front Passenger's Power Window Switch Replacement (4-Door)
- 2-door Front Passenger's Power Window Switch Replacement (2-Door)

2. Disconnect the 37P connector (A) from the front passenger's (passenger's) power window switch (B).





3. Inspect the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.

4. Reconnect the connector to the front passenger's power window switch, turn the ignition switch to ON (II), and do these input tests at the following connector.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 5.





5. Turn the ignition switch to LOCK (0), open and close the driver's door, then disconnect the 37P connector from the front passenger's power window switch again.

6. With the connector still disconnected, do these input tests at the following connector.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the front passenger's power window switch, and go to step 7.









7. With the front passenger's power window AUTO UP/AUTO DOWN function, reset the power window control unit Testing and Inspection.