Radiator: Service and Repair

Radiator and Fan Replacement

1. Do the battery removal procedure. Removal and Replacement

2. Drain the engine coolant. Service and Repair

3. Remove the front grille cover. Front Grille Cover Replacement

4. Disconnect the fan motor connectors (A) and the hood switch connector (B), then remove the harness clamps (C).






5. Disconnect the reservoir hose (A) and remove the radiator cap base mounting bolts (B), the bolts (C), and the radiator upper brackets (D).






6. Disconnect the upper radiator hose (A).

7. Raise the vehicle on the lift.






8. Remove the splash shield.






9. Disconnect the engine coolant temperature (ECT) sensor 2 connector (A), and remove the harness clamp (B).

10. Disconnect the lower radiator hose (C) from the radiator.

11. Lower the vehicle on the lift.






12. Remove the condenser bracket mounting bolts (A), then remove the bulkhead (B).






13. Pull up the radiator, then remove the fan shroud assemblies and other parts from the radiator.

14. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.

15. Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.

16. Do the battery installation procedure. Removal and Replacement

17. Fill the radiator with engine coolant, and bleed the air from the cooling system. Service and Repair

18. Clean up any spilled engine coolant.

DENSO





CoPAR