Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-Z L4-1.5L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair




Air Cleaner Removal/Installation

1. Disconnect the MAF sensor/IAT sensor connector (A), and remove the harness clips.

NOTE: Be careful not to damage the MAF sensor/IAT sensor on the air cleaner cover.





2. Disconnect the breather hose (B).

3. Loosen the hose bands (C) and remove the bolts, then remove the air cleaner (D) from the throttle body and the intake air tube.

4. Install the parts in the reverse order of removal.

NOTE: When tightening the screw (E) of the hose band, align the edge of the hose band (F) with the mark (G) painted on the hose band. If you tighten the screw over the mark, replace the hose band.

pro multis · About Operation CHARM