Audio Unit Removal and Installation

Audio Unit Removal and Installation

Removal

1. Driver's Dashboard Lower Cover





1. Remove the driver's dashboard lower cover (A).

2. Dashboard Subdisplay Visor





1. Remove the dashboard subdisplay visor (A).

3. Center Lower Panel





1. Remove the center lower panel (A).

NOTE: Take care not to scratch the center console panel or the related parts.

4. Audio Unit Assembly




NOTE:
* Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.
* Do not work in a dusty or dirty place.
* Discharge static electricity from your body before and during the work.
* Do not touch the circuit board(s) with your bare hands.
* Do not work with dirty hands.
* Do not touch the terminal connector of the flat plate cable with your bare hands (If you have touched it, wipe it off thoroughly.).
* Eject the CD before disconnecting the audio unit to prevent damaging the CD player's load mechanism.
* If you are replacing the audio unit, write down the audio presets (if possible), and enter them into the new audio unit.

1. Remove the bolts (A).





2. Disconnect the connectors, then pull out the audio unit (A).

5. Audio Unit





1. Remove the audio unit (A) from the audio switch panel (B).

Installation

1. Audio Unit





1. Install the audio switch panel (A) to the audio unit (B).

2. Audio Unit Assembly





1. Connect the connectors, then install the audio unit (A).

NOTE: Make sure all the connectors and the antenna lead are secure.





2. Install the bolts (A).

3. Center Lower Panel





1. Install the center lower panel (A).

NOTE: Take care not to scratch the center console panel or the related parts.

4. Dashboard Subdisplay Visor





1. Install the dashboard subdisplay visor (A).

5. Driver's Dashboard Lower Cover





1. Install the driver's dashboard lower cover (A).