Assist Handle Replacement - Rear

Assist Handle Replacement - Rear

Removal Procedure





1. Remove the hinge pillar garnish trim. Refer to Trim Replacement - Hinge Pillar (Trim Replacement - Hinge Pillar) .
2. Remove the bolts that retain the assist handle to the vehicle.
3. Remove the assist handle from the vehicle.



Installation Procedure





1. Install the assist handle to the vehicle.
2. Install the bolts that retain the assist handle to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the hinge pillar garnish trim. Refer to Trim Replacement - Hinge Pillar (Trim Replacement - Hinge Pillar) .

Tighten the bolts to 12 Nm (9 lb ft).