Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Clearance Lamp Replacement (SUT Front)




Clearance Lamp Replacement (SUT Front)

Removal Procedure




1. Remove the screw from the lamp.
2. Remove the lamp by lifting upward at the rear edge.
3. Disconnect the lamp socket.
4. Remove the lamp housing from the vehicle.
5. Remove the bulb, if necessary.

Installation Procedure




1. Install the bulb to the socket.
2. Install the lamp housing to the vehicle. The front edge must be secure.
3. Ensure the lamp housing foam seal is not damaged.
4. Install the lamp assembly to the roof luggage carrier side rail end cap.

Caution: Refer to Fastener Caution (Fastener Caution).

5. Install the screw to the lamp assembly.

Tighten the screw to 2.5 Nm (22 lb in).