Oil Pick Up/Strainer: Service and Repair

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure




1. Remove the oil pan. Refer to Oil Pan Replacement (Service and Repair).
2. Remove the oil pump pipe screen brace bolts.
3. Remove the oil pump pipe screen bolt.
4. Remove the oil pump pipe screen from the engine.
5. Remove and discard the oil pump pipe seal.
6. Clean and inspect the oil pump pipe screen.

Installation Procedure




1. Install a NEW oil pump pipe seal onto the oil pump pipe screen assembly.
2. Install the oil pump pipe screen to the engine.
3. Apply sealant to the oil pump pipe bolt threads. Refer to Adhesives, Fluids, Lubricants, and Sealers (Sealers, Adhesives, and Lubricants).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the oil pump pipe screen assembly bolts.

Tighten the bolts to 10 Nm (89 lb in).

5. Install the oil pan. Refer to Oil Pan Replacement (Service and Repair).