Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the nuts from the link assemblies.
3. Remove the link assemblies.
4. Inspect all of the parts for wear and damage.

Installation Procedure

1. Support the lower control arms at curb height.




2. Install the link assemblies.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the nuts to the link assemblies.

Tighten the nut to 80 Nm (59 lb ft).

4. Lower the vehicle.