C1320

DTC C1317 FL SENSOR WRONG TYPE INSTALL
DTC C1318 FR SENSOR WRONG TYPE INSTALL
DTC C1319 RL SENSOR WRONG TYPE INSTALL
DTC C1320 RR SENSOR WRONG TYPE INSTALL

COMPONENT LOCATION
Refer to DTC C1121. C1121

GENERAL DESCRIPTION
Refer to DTC C1121. C1121

DTC DESCRIPTION
This DTC indicates that "L/Line WE sensor" was installed to a H/Line system incorrectly.

DTC DETECTING CONDITION





COMPONENT INSPECTION
1. Turn ON 'TPMS exciter'.
2. Select "TIRE SNSR CONFIG (EXCITER)" mode.
3. Execute "SET SENSOR STATUS" of FL/FR/RL/RR WE sensor.
4. Monitor the parameter of FL/FR/RL/RR WE sensor on the 'TPMS exciter'.





5. Is parameter within specifications?

YES
> Substitute with a known-good TPMS receiver module and check for proper operation.
> If the problem is corrected, replace TPMS receiver module and then go to "Verification of Vehicle Repair" procedure.

No
> Replace FL/FR/RL/RR WE sensor if necessary and register sensor ID with 'TPMS exciter'.
> Go to "Verification of Vehicle Repair" procedure.

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1121. C1121