Engine Cannot Be Started In "P" or "N" Position

Engine Cannot Be Started In "P" or "N" Position

SYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D"or "R" position.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis.

Do the self-diagnosis results indicate PNP switch?
Yes >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH". P0705
No >> GO TO 2.

2. CHECK CONTROL LINKAGE
Check the control linkage. Shifter A/T

OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.

3. CHECK STARTING SYSTEM
Check the starting system. Starting System

OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.