Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In P or N PositionSYMPTOM:
^ Engine cannot be started with selector lever in P or N position.
^ Engine can be started with selector lever in D or R position.
DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-86, "SELF-DIAGNOSTIC RESULT MODE". Self-Diagnostic Result Mode
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system.
NO >> GO TO 2.
2. CHECK CONTROL CABLE
Check the control cable.
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable.
3. CHECK STARTING SYSTEM
Check the starting system.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.