Removal and Installation

REAR SEAT BELT


SEAT BELT RETRACTOR : Removal and Installation


REMOVAL
1. Remove the outer anchor.
- Remove the rear seat cushion. Refer to Removal and Installation.
- Remove the outer anchor fixing anchor bolt and remove the outer anchor.
2. Remove the inner anchor
Remove the inner anchor fixing anchor bolt and remove the inner anchor.
3. Remove the shoulder anchor.
- Remove the luggage side upper and lower finisher. Refer to Body Side Trim.
- Remove the shoulder anchor fixing anchor bolt and remove the shoulder anchor.
4. Remove the outer seat belt retractor.
- Remove the luggage side upper and lower finisher. Refer to Body Side Trim.
- Remove the fixing anchor bolt and remove the outer seat belt retractor.
5. Remove the center seat belt retractor.
- Remove the rear seatback. Refer to Removal and Installation.





- Remove the pawls, and then remove seat belt finisher.
- Remove the seatback board (RH). Refer to Disassembly and Assembly.





- Disengage rear center seat belt retractor cover (1) fixing pawls.





- Disengage rear center seat belt retractor fixing nut (A) with a socket wrench (B).





- Remove rear center seat belt retractor (1) and retractor cover simultaneously from rear seatback frame.





- Remove fog rings (A) from seatback upper side.





- Remove seat belt guide (upper) fixing screws (A), and then remove seat belt guide (upper) (1).
- Remove rear center seat belt assembly.

INSTALLATION
Install in the reverse order of removal.






CAUTION:
Push the center seat belt webbing (1) to place center seat belt webbing between seatback (RH) and reclining device inner cover (not in front of LATCH striker) as shown in the figure, before installing seat cushion.