Front Suspension Assembly

FRONT SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
1. Set front wheels in a straight-ahead position.

CAUTION:
Never depress brake pedal when measuring.
2. Place an iron bar or equivalent between transverse link or upper link and steering knuckle.
3. Measure axial end play by playing it up and down.

Standard
Axial end play : Refer to "Ball Joint". Front Suspension

CAUTION:
Be careful not to damage ball joint boot. never damage the installation position by applying excessive force.

SHOCK ABSORBER
Check for oil leakage, damage. Replace it if necessary.