Diagnosis Description

DIAGNOSIS SYSTEM (RAS CONTROL UNIT)


Diagnosis Description


DESCRIPTION
The RAS warning lamp in the combination meter will flicker according to the self-diagnostic results. As for the details of the RAS warning lamp flickering patterns.

DIAGNOSTIC PROCEDURE
1. Start the engine.
2. Perform the following procedure within 10 seconds after engine start.
- Turn steering wheel left and right at 20� or more and 5 times
- Depress the brake pedal 5 times or more
3. Read the flickering of RAS warning lamp.

NOTE:
When the RAS warning lamp flashes 4 Hz and continues repeating it, the system is normal.

JUDGMENT SELF-DIAGNOSIS CODE
When a malfunction is detected, the malfunction route is indicated by flickering of the RAS warning lamp. NOTE:





When the RAS warning lamp flashes 4 Hz and continues repeating it, the system is normal.






ERASE SELF-DIAGNOSIS
- In order to make it easier to find the cause of hard-to-duplicate malfunctions, malfunction information is stored into the control unit as necessary during use by the user. This memory is not erased no matter how many times the ignition switch is turned ON and OFF.
- However, this information is erased or by erasing the memory using the CONSULT-III.