Removal and Replacement

BATTERY


Removal and Installation


REMOVAL





1. Disconnect the negative battery terminal (1) and positive battery terminal (2).

CAUTION:
Remove negative battery terminal first.

White arrow : Front

2. Remove the battery cover.
3. Remove the battery clamp bolt (3) and battery clamp.
4. Remove the battery.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
When installing, install the positive battery terminal first.

Battery clamp bolt : 14.7 Nm (1.5 kg-m, 11 ft-lb)
Battery terminal nut : 3.5 Nm (0.36 kg-m, 31 in-lb)

Reset electronic systems as necessary. Programming and Relearning.