Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2013 >> QX56 AWD V8-5.6L (VK56VD) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Programming and Relearning >> Configuration (CAN Gateway) >> Work Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Work Procedure




CONFIGURATION (CAN GATEWAY)

Work Procedure


1. WRITING MODE SELECTION

CONSULT Configuration
Select "CONFIGURATION" of CAN gateway.
When writing saved data-GO TO 2.
When writing manually-GO TO 3.

2. PERFORM "WRITE CONFIGURATION - CONFIG FILE"

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file".
- GO TO 4.

3. PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"

CONSULT Configuration
1.Select "WRITE CONFIGURATION - Manual selection".
2.Select "SETTING".
3.When "COMMAND FINISHED", select "End".
- GO TO 4.

4. CHECK "SELF DIAGNOSTIC RESULT"

1.Erase all ECU self-diagnosis results using CONSULT.
2.Turn the ignition switch OFF.
3.Turn the ignition switch ON and wait for 2 seconds or more.
4.Perform "All DTC Reading" using CONSULT.
5.Check that all ECU self-diagnosis results have no DTC (e.g. U1000 and U1001) of CAN communication.
- WORK END
pro multis · About Operation CHARM