Switch Monitor Procedure

How To Perform Switch Monitor




Description
In this mode, when BCM detects the input signal from a switch in IVMS as shown, the detection is indicated by the map lamp and step lamps with buzzer.

Part 1:

Part 2:

Switch Monitor Item
The status of the switch (except the ignition switch, interior lamp ill switch, and map lamp switch) as input to each control unit can be monitored.

Cancel of Switch Monitor
If one of the following conditions is satisfied, the switch monitor is cancelled.
- Turn ignition switch OFF.
- Drive the vehicle at more than 7 km/h (4 MPH).