Power Walk-In Function
POWER SEAT FOR DRIVER SIDEPOWER WALK-IN FUNCTION
POWER WALK-IN FUNCTION : System Diagram
POWER WALK-IN FUNCTION : System Description
OUTLINE
Slide the driver seat automatically with the power walk-in switch operation so as to easily facilitate the entry to the rear seat.
Forward Operation
Slide (forward) the driver seat to the front end position (sliding limit switch: ON) by operating the power walk-in switch when the seatback is folded down.
The forward operation is stopped by folding the seatback (forward switch: OFF) during the forward operation.
Backward Operation
The seat back is folded up after performing the forward operation of power walk-in function. Slide (backward) it to the position before performing the forward operation by operating the power walk-in switch.
If the sliding operation is performed after performing the forward operation, do not perform the backward operation.
OPERATION PROCEDURE
Forward Operation
1. Open driver door.
2. Pull the walk-in lever on the upper part of seatback, and then the seatback is folded down.
3. Press the power walk-in switch.
4. Slide the seat to the front end position.
Backward Operation
1. Open driver door.
2. Fold up the seatback after performing the forward operation.
3. Press the power walk-in switch.
4. Slide the seat to the previous position before the forward operation was performed.
OPERATION CONDITION
Perform the power walk-in function when the following conditions are satisfied.
Forward Operation
Backward Operation
DETAIL FLOW
Forward Operation
Backward Operation
POWER WALK-IN FUNCTION : Component Description
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
