Preliminary Checks

Preliminary Check

PRE-CRASH SEAT BELT OPERATION INSPECTION

WARNING:
- The following tests should be performed in a safe, open place that is free of traffic and obstacles.
- The tests should be performed on a dry, paved road. Do not attempt the tests on wet or unpaved road, open road, or highway. (This may cause an accident or personal injury.)
- Driver and passenger assume it will not operate and prepare themselves accordingly.

1. Tighten driver and passenger seat belts.
2. Drive at approximately 25 km/h (16 MPH).
3. Notify passenger of a sudden stop. Driver and passenger prepare themselves for the possibility of system not operating. Then, driver fully depresses the brake pedal to stop suddenly.
4. Make sure that the shoulder of the seat belt is pulled while braking.