CAN

PSB BRANCH LINE CIRCUIT


Diagnosis Procedure

1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the pre-crash seat belt control unit for damage, bend and loose connection (unit side and connector side).
Is the inspection result normal?
YES - GO TO 2.
NO - Repair the terminal and connector.
2.CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect the connector of pre-crash seat belt control unit.
2. Check the resistance between the pre-crash seat belt control unit harness connector terminals.





Is the measurement value within the specification?
YES - GO TO 3.
NO - Repair the pre-crash seat belt control unit branch line.
3.CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the pre-crash seat belt control unit. Refer to Power Supply and Ground Circuit.
Is the inspection result normal?
YES (Present error)-Replace the pre-crash seat belt control unit. Refer to Exploded View.
YES (Past error)-Error was detected in the pre-crash seat belt control unit branch line.
NO - Repair the power supply and the ground circuit.