Inspection

ENGINE COOLANT


Inspection


LEVEL CHECK
- Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.






- Adjust the engine coolant level if necessary.

LEAK CHECK
- To check for leakage, apply pressure to the cooling system with the radiator cap tester (commercial service tool) and radiator cap tester adapter (commercial service tool) (A).






Testing pressure : 157 kPa (1.6 kg/cm2, 23 psi)


WARNING:
Never remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator.

CAUTION:
Higher test pressure than specified may cause radiator damage.

NOTE:
In a case that engine coolant decreases, replenish radiator with engine coolant.
- If anything is found, repair or replace damaged parts.