RAS Control Unit Circuit (With RAS)

TROUBLE DIAGNOSIS FOR SYSTEM


RAS Control Unit Circuit (With RAS)


INSPECTION PROCEDURE
1.CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.





Is above displayed on the self-diagnosis display?
YES - GO TO 2.
NO - INSPECTION END
2.CHECK RAS CONTROL UNIT CIRCUIT
1. Perform RAS control unit self-diagnosis. Repair or replace items indicated, then perform RAS control unit self-diagnosis again. Refer to Consult-III Function (RAS/HICAS).
2. Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK - INSPECTION END
NG
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".