Power Steering Line/Hose: Service and Repair
HYDRAULIC LINE
Removal and Installation
COMPONENTS (VQ35HR 2WD MODELS)
COMPONENTS (VQ35HR AWD MODELS)
COMPONENTS (VK45DE 2WD MODELS)
COMPONENTS (VK45DE AWD MODELS)
REMOVAL AND INSTALLATION
CAUTION:
- Securely insert harness connector to pressure sensor.
- Insert hose securely until it contacts tube spool (Do not apply fluid).
- Install eye-bolt with eye-joint (assembled to high-pressure hose) protrusion facing with pump side cutout, and then tighten in to the specified torque after tightening by hand.