Rear Suspension Assembly

REAR SUSPENSION ASSEMBLY


On-Vehicle Inspection

Make sure the mounting conditions (looseness, back lash) of each component and component conditions
(wear, damage) are normal.

INSPECTION SUSPENSION ARM BALL JOINT AXIAL END PLAY
Measure axial end play by placing and moving up/down with an iron pry bar or something similar between suspension arm and axle assembly.

Standard value
Axial end play : 0 mm (0 in)


CAUTION:
Be careful not to damage ball joint boot.

SHOCK ABSORBER INSPECTION
Check shock absorber for oil leakage, damage and replace if malfunction is detected.