Work Procedure

SYSTEM INITIALIZATION


Work Procedure

1.STEP 1
1. Turn ignition switch ON.
2. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
- GO TO 2.
2.STEP 2
Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
- GO TO 3.
3.STEP 3
Check that auto-up function operates normally.
- GO TO 4.
4.STEP 4
Check anti-pinch function. Work Procedure.
- END