Work Procedure
CHECK ANTI-PINCH FUNCTION
Work Procedure
1.STEP 1
Fully open the door window.
- GO TO 2.
2.STEP 2
Place a piece of food near fully closed position.
- GO TO 3.
3.STEP 3
Close door glass completely with AUTO-UP.
- GO TO 4.
4.STEP 4
Check the following conditions
- Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that glass does not rise not when operating the power window main switch while lowering.
CAUTION:
- Perform initial setting when auto-up operation or anti-pinch function does not operate normally.
- Check that AUTO-UP operates before inspection when system initialization is performed.
- Do not check with hands and other body parts because they may be pinched. Do not get pinched.
- It may switch to fail-safe mode if open/close operation is performed continuously without full close.
Perform initial setting in that situation. Work Procedure.
- END