System Description

AUTOMATIC DRIVE POSITIONER SYSTEM

POWER WALK-IN FUNCTION : System Description


OUTLINE

Slide the driver seat automatically with the power walk-in switch operation so as to easily facilitate the entry to the rear seat.
Forward Operation
Slide (forward) the driver seat to the front end position (sliding limit switch: ON) by operating the power walk-in switch when the seatback is folded down.
The forward operation is stopped by folding the seatback (forward switch: OFF) during the forward operation.
Backward Operation
The seat back is folded up after performing the forward operation of power walk-in function. Slide (backward)
it to the position before performing the forward operation by operating the power walk-in switch.
If the manual operation, memory operation, and Intelligent Key interlock operation are performed after performing the forward operation, do not perform the backward operation.

OPERATION PROCEDURE

Forward Operation
1.Open driver door.
2.Pull the walk-in lever on the upper part of seatback, and then the seatback is folded down.
3.Press the power walk-in switch.
4.Slide the seat to the front end position.
Backward Operation
1.Open driver door.
2.Fold up the seatback after performing the forward operation.
3.Press the power walk-in switch.
4.Slide the seat to the previous position before the forward operation was performed.

OPERATION CONDITION

Perform the power walk-in function when the following conditions are satisfied.
Forward Operation





Backward Operation






DETAIL FLOW

Forward Operation





Backward Operation