Special Repair Requirement

INSPECTION AND ADJUSTMENT

THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement


1. START

WITH CONSULT-III
1.Turn ignition switch ON.
2.Select "CLSD THL POS LEARN" in "WORK SUPPORT" mode.
3.Follow the instructions on the CONSULT-III display.
4.Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
WITHOUT CONSULT-III
1.Start the engine.
NOTE:
Engine coolant temperature is 25�C (77�F) or less before engine starts.
2.Warm up the engine.
NOTE:
Raise engine coolant temperature until it reaches 65�C (149�F) or more.
3.Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
- END