Rear Brake Disc
Brake Disc
Removal
CAUTION: Brake discs must be renewed in pairs, unless one disc requires changing before 1000 miles (1600 kilometers) from new.
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the rear brake pads. For additional information, refer to Brake Pads - Vehicles With: Standard Brakes Rear Disc Brake Pads
3 Remove the brake caliper anchor bracket.
- Remove and discard the 2 bolts.
4 Remove the brake disc.
- Remove the 2 clips.
Installation
1
WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Install the brake disc.
- Clean the component mating faces.
- Secure the clips.
2
CAUTION: Make sure that new bolts are installed.
Install the brake caliper anchor bracket.
- Clean the component mating faces.
- Tighten the bolts to 103 Nm.
3 Install the brake pads. For additional information, refer to Brake Pads - Vehicles With: Standard Brakes Rear Disc Brake Pads