G256924p19: C1885, C1887; Right-Hand Rear Height Sensor Signal Circuit Fault

PINPOINT TEST G256924p19: C1885, C1887; RIGHT-HAND REAR HEIGHT SENSOR SIGNAL CIRCUIT FAULT
G256924t56: CHECK THE RIGHT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO B+
1. Disconnect the right-hand rear height sensor electrical connector, CV04. 2. Measure the voltage between CV04, pin 04 (YG) and GROUND.
^ Is the voltage greater than 3 volts?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t57.

G256924t57: CHECK THE RIGHT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO GROUND
1. Measure the resistance between CV04, pin 04 (YG) and GROUND.
^ Is the resistance less than 10,000 ohms?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t58.

G256924t58: CHECK THE RIGHT-HAND REAR SIGNAL CIRCUIT FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal. 2. Disconnect the ASU electrical connector, CR90. 3. Measure the resistance between CR90, pin 11 (YG) and CV04, pin 04 (YG).
^ Is the resistance greater than 5,000 ohms?
^ Yes
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
^ CHECK for DTC's indicating a sensor fault. Contact dealer technical support for confirmation of possible module failure, and/or raise an EPQR.