ELSD Verification Test

ELSD VERIFICATION TEST
ASCM VERIFICATION TEST
1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
2. With the scan tool, erase DTCs.
3. Make sure that all accessories are turned off and that the battery is fully charged.
4. With the scan tool, under "Miscellaneous Functions" run the Quick Learn routine.
5. With the scan tool, under "System Test" run the System Functionality Test.
6. Test drive the vehicle and verify proper operation.
7. With the scan tool, read DTCs in the ELSD.

Are there any DTCs present in the Electronic Limited Slip Differential (ELSD)?

Yes

- Testing and Inspection Perform the appropriate diagnostic procedure.

No

- Repair is complete.