Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2010 >> LR4 (LA) V6-4.0L >> Repair and Diagnosis >> Body and Frame >> Splash Guard >> Service and Repair >> Fender Splash Shield
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fender Splash Shield





Fender Splash Shield

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the fender moulding. For additional information, refer to Fender Moulding




3 Remove the fender splash shield.
- Remove the 2 screws.
- Remove the 6 retainers.
- Disconnect the electrical connector.




4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the tire pressure antenna.
- Remove the 2 retainers.

Installation
1 Install the tire pressure antenna.
- Install the retainers.
2 Install the fender splash shield.
- Connect the electrical connector.
- Install the retainers.
- Install the screws.
3 Install the fender moulding. For additional information, refer to Fender Moulding

pro multis · About Operation CHARM