Rear Door Window Motor: Service and Repair

Rear Door Window Regulator Motor

Removal
1 Remove the rear door window glass. For additional information, refer to Rear Door Window Glass Rear Door Window Glass




2 Remove the rear door window regulator and motor.
- Disconnect the electrical connector.
- Remove and discard the lower bolt.
- Remove the 2 upper bolts.

Installation
1 Install the rear door window regulator and motor.
- Remove the two clips from the rear door window regulator and motor.
- Tighten the 2 upper bolts to 10 Nm (7 lb.ft).
- Tighten the new bolt to 10 Nm (7 lb.ft).
2 Connect the rear door window glass regulator and motor electrical connector.
3 Install the rear door window glass. For additional information, refer to Rear Door Window Glass Rear Door Window Glass