Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2011 >> Range Rover Sport (LS) V8-5.0L SC >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Suspension Control ( Automatic - Electronic ) >> Suspension Control Module >> Service and Repair >> Dynamic Response Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Dynamic Response Module





Dynamic Response Module

Removal

NOTE:
The dynamic response module is always located on the driver's side of the vehicle.
1 Remove the cowl side trim panel. For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel




2 Remove the closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.




3 Remove the dynamic response module.
- Remove the 2 bolts.
- Disconnect the 2 electrical connectors.

Installation
1 Install the dynamic response module.
- Connect the electrical connectors.
- Tighten the 2 bolts to 4 Nm (3 lb.ft).
2 Install the closing trim panel.
- Connect the electrical connector.
- Secure the clip.
- Tighten the screws.
3 Install the cowl side trim panel. For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel
4 Initiate a new control module using T4.

pro multis · About Operation CHARM