Housing Assembly HVAC: Service and Repair

Plenum Chamber

Removal
1 Remove the A-pillar mouldings. For additional information, refer to A-Pillar Moulding LH Service and Repair
2 Remove the windshield wiper arms. For additional information, refer to Front Wiper Pivot Arm Front Wiper Pivot Arm




3 Release the hood seal from the plenum chamber.
4 Remove the plenum chamber panel.
- Release the 8 clips.




5
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the clips from the plenum chamber panel.

Installation
1 To install, reverse the removal procedure.