Removal and Replacement

Battery

Removal
1 Secure the hood in the service position.
- Release the support struts.




2 Remove the battery cover.
3 Disconnect the battery ground cable. For additional information, refer to Specifications Specifications
4 Disconnect the battery positive cable.




5 Remove 2 bolts securing the battery clamp and remove the clamp.
6 Remove the battery.

Installation
1
NOTE:
Apply petroleum jelly to the battery terminals.
To install, reverse the removal procedure.
- Tighten the battery clamp bolts to 5 Nm (4 lb.ft).
- Tighten the battery terminals to 5 Nm (4 lb.ft).