Rear Fender Liner: Service and Repair

Rear Fender Splash Shield

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise the rear of the vehicle.




2 Remove the road wheel.
3 Remove the 2 clips securing the rear fender splash shield to the rocker panel and rear bumper.
4 Remove the 3 plastic nuts securing the rear fender splash shield.
5 Remove the 4 screws securing the rear fender splash shield.
6 Remove the rear fender splash shield.

Installation
1 Install the rear fender splash shield.
- Install the plastic nuts.
- Install the screws.
- Install the clips.
2 Install the road wheel.
- Tighten the road wheel nuts to 140 Nm (103 lb.ft).
3 Lower the vehicle.
- Remove the stands.