Floor Console Extension

Floor Console Extension

Removal





1 Remove the LH floor console extension.
- Remove the screw.
- Release the 2 clips.




2
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the floor console extension trim panel.
- Remove the rubber isolator.
- Remove the 6 screws.
- Remove the 2 clips.

Installation
1 Install the floor console extension trim panel.
- Install the rubber isolator.
- Install the 6 screws.
- Install the 2 clips.
2 Install the LH floor console extension.
- Secure the 2 clips.
- Tighten the screw.