Removal

INTERIOR: ROOF HEADLINING:

REMOVAL

1. REMOVE NO. 2 REAR SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)
HINT: Removal

2. REMOVE NO. 2 REAR SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)
HINT: Removal

3. REMOVE FRONT DOOR SCUFF PLATE LH

(a) Using a screwdriver, disengage the 6 claws and remove the scuff plate.
HINT: Tape the screwdriver tip before use.

4. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedures described above for the LH side.

5. REMOVE COWL SIDE TRIM BOARD LH

(a) Remove the cap nut.
(b) Using a screwdriver, disengage the 2 claws and remove the trim board.
HINT: Tape the screwdriver tip before use.

6. REMOVE COWL SIDE TRIM BOARD RH
HINT: Use the same procedures described above for the LH side.

7. REMOVE QUARTER SCUFF PLATE INSIDE LH

(a) Remove the 2 quarter scuff plate inner covers.
(b) Using a screwdriver, disengage the 4 claws and remove the scuff plate.
HINT: Tape the screwdriver tip before use.

8. REMOVE QUARTER SCUFF PLATE INNER RH
HINT: Use the same procedures described above for the LH side.

9. REMOVE REAR DOOR SCUFF PLATE LH

(a) Using a screwdriver, disengage the 4 claws and remove the scuff plate.
10. REMOVE REAR DOOR SCUFF PLATE RH
HINT: Use the same procedures described above for the LH side.

11. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
12. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
14. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
15. REMOVE CENTER PILLAR GARNISH LOWER LH

(a) Remove the front seat belt anchor bolt and front seat belt.
(b) Disengage the 2 clips and 2 claws, and remove the center pillar garnish.
16. REMOVE CENTER PILLAR GARNISH LOWER RH
HINT: Use the same procedures described above for the LH side.

17. REMOVE CENTER PILLAR GARNISH LH

(a) Remove the 2 screws.
(b) Disengage the 2 claws and clip, and remove the pillar garnish.
18. REMOVE CENTER PILLAR GARNISH RH
HINT: Use the same procedures described above for the LH side.

19. REMOVE BACK DOOR WEATHERSTRIP
20. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

(a) Remove the 5 screws.
(b) Using a screwdriver, disengage the 2 claws and remove the mat support plate.
HINT: Tape the screwdriver tip before use.

21. REMOVE QUARTER INSIDE TRIM BOARD LH

(a) Remove the luggage compartment hook by turning it clockwise.
(b) Remove the screw and quarter trim cover.

(c) Remove the bolt and the floor anchor part of the rear No. 1 seat belt assembly.
(d) Remove the 2 screws.
(e) Using a screwdriver, disengage the 8 clips and remove the trim board.
HINT: Tape the screwdriver tip before use.

22. REMOVE QUARTER INSIDE TRIM BOARD RH
HINT: Use the same procedures described above for the LH side.

23. REMOVE ROOF SIDE GARNISH INNER LH

(a) Remove the floor anchor part of the seat No. 2 belt assembly.
(b) Using a screwdriver, firmly push the pin to disengage the clips (A).
HINT: Tape the screwdriver tip before use.

(c) Using a screwdriver, disengage the 8 clips (B and C) and remove the garnish.
HINT:
- Tape the screwdriver tip before use.
- The clip (A) cannot be reused.

24. REMOVE ROOF SIDE GARNISH INNER RH
HINT: Use the same procedures described above for the LH side.

25. REMOVE FRONT PILLAR GARNISH LH

(a) Remove the 2 grip plugs, 2 screws and assist grip.
(b) Using a screwdriver, disengage the clip and remove the garnish.
HINT: Tape the screwdriver tip before use.

(c) Pull the garnish upward, and remove the pillar garnish from the instrument panel.
(d) w/ Curtain shield airbag:
Protect the curtain shield airbag.
(1) Thoroughly cover the airbag with cloth or nylon of 700 mm (27.56 in.) x 120 mm (4.72 in.) and fix the ends of the cover with adhesive tape, as shown in the illustration.
NOTE: Cover the curtain shield airbag with the protection cover as soon as the front pillar garnish is removed.

26. REMOVE FRONT PILLAR GARNISH RH
HINT: Use the same procedures described above for the LH side.

27. REMOVE ASSIST GRIP ASSEMBLY
(a) Using a screwdriver, disengage the 4 claws and remove the 2 assist grip plugs.
HINT: Tape the screwdriver tip before use.

(b) Remove the 2 screws and assist grip.
HINT:
- w/o Rear No. 2 Seat:
Remove the 4 assist grips.
- w/ Rear No. 2 Seat:
Remove the 6 assist grips.

28. REMOVE ROOF CONSOLE BOX SUB-ASSEMBLY

(a) Using a screwdriver, disengage the 3 claws and 2 clips, and remove the console box assembly.
HINT: Tape the screwdriver tip before use.

(b) Disconnect the connectors.

29. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System)
(a) Remove the 2 lenses.
(b) Remove the 2 bolts.
(c) Disengage the 4 clips.
(d) Disconnect the connector and remove the television base.
(e) Disconnect the television display connector.
30. REMOVE NO. 1 INTERIOR LIGHT ASSEMBLY (w/o Rear Seat Entertainment System)

(a) Using a screwdriver, remove the lens cover.
(b) Using a screwdriver, disengage the 4 claws and remove the interior light assembly, as shown in the illustration.
HINT: Tape the screwdriver tip before use.

(c) Disconnect the interior light connector.
31. REMOVE NO. 2 INTERIOR LIGHT ASSEMBLY

(a) Pull out the seat belt buckle from the roof headlining trim cover.
(b) Using a roof moulding remover, disengage the 6 claws and remove the roof headlining trim cover.
33. REMOVE VISOR BRACKET COVER

(a) Using a screwdriver, disengage the 4 claws and remove the visor bracket cover.
- Tape the screwdriver tip before use.
- Use the same procedure to remove the visor bracket cover on the other side.

34. REMOVE VISOR ASSEMBLY LH
(a) Remove the 2 screws and visor assembly.
35. REMOVE VISOR ASSEMBLY RH
(a) Remove the 2 screws and visor assembly.
36. REMOVE CENTER VISOR ASSEMBLY LH
(a) Remove the 2 screws and center visor assembly.
37. REMOVE CENTER VISOR ASSEMBLY RH
(a) Remove the 2 screws and center visor assembly.
38. REMOVE VISOR HOLDER
(a) Remove the screw and visor holder.
HINT: Use the same procedure to remove the visor holder on the other side.

39. REMOVE COAT HOOK
(a) Remove the bolt and coat hook.
HINT: Use the same procedure to remove the hook on the other side.

40. REMOVE COAT HOOK (w/o Rear No. 2 Seat)
(a) Remove the 2 bolt and coat hook.
HINT: Use the same procedure to remove the hook on the other side.

41. REMOVE ROOF HEADLINING ASSEMBLY
42. REMOVE ROOF SIDE AIR OUTLET REGISTER
(a) Remove the screw and register.