Pinout Values and Diagnostic Parameters

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (BODY ECU)
(a) Disconnect the IB, IE, IH, IK, IL, B3 and B5 J/B connectors, and check the voltage or continuity of each terminal of the vehicle side connectors.









If the result is not as specified, there may be a malfunction on the wire harness side.
(b) Reconnect the connectors and check the voltage of each terminal of the connectors.





If the result is not as specified, the vehicle may be defective. In this case, check the harness, connector and fuse between the ECU and battery. Then repair or replace it if necessary.