Installation

PARKING BRAKE: PARKING BRAKE CABLE:

INSTALLATION
HINT: Removal of the parking brake cable assembly No. 2 is same as that of the parking brake cable assembly No. 3.

1. INSTALL PARKING BRAKE CABLE ASSEMBLY NO. 3






(a) Install the parking brake cable assembly No. 3 to the parking brake pull rod sub-assembly No. 1.
(b) Install the parking brake cable assembly No. 3 with the 4 bolts.





Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)






(c) Install the parking brake cable assembly No. 3 with the 2 bolts to the backing plate.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
2. APPLY HIGH TEMPERATURE GREASE Reassembly

3. INSTALL PARKING BRAKE SHOE Reassembly

4. INSTALL PARKING BRAKE SHOE STRUT LH
5. INSTALL PARKING BRAKE SHOE STRUT COMPRESSION SPRING
6. INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING Reassembly

7. CHECK PARKING BRAKE INSTALLATION Reassembly

8. INSTALL REAR DISC
9. ADJUST PARKING BRAKE SHOE CLEARANCE Reassembly

10. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH
(a) Install the rear disc brake caliper assembly LH with the 2 bolts.
Torque: 105 Nm (1071 kgf-cm, 77 ft-lbf)
11. INSTALL REAR WHEEL
Torque: 112 Nm (1137 kgf-cm, 82 ft-lbf)
12. INSPECT PARKING BRAKE LEVER TRAVEL
HINT: Adjustments

13. ADJUST PARKING BRAKE LEVER TRAVEL
HINT: Adjustments

14. INSTALL REAR CONSOLE BOX ASSEMBLY
15. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
16. INSTALL CONSOLE PANEL UPPER
17. INSTALL CONSOLE UPPER PANEL GARNISH NO. 1
18. INSTALL CONSOLE UPPER PANEL GARNISH NO. 2