Installation

INTERIOR: ROOF HEADLINING: INSTALLATION

INSTALLATION

1. INSTALL NO. 1 ROOF WIRE
(a) without Sliding Roof:
(1) Remove the backing sheet on the double-sided tape without allowing the tape to touch the contact surface.
(2) Apply new double-sided tape to locations shown in the illustration after aligning the tape with the marking of the roof headlining.

NOTICE:
- Securely attach the No. 1 roof wire.
- Do not allow the No. 1 roof wire to sit loosely. Doing so may cause abnormal noise.

(b) with Sliding Roof (Standard Type) / for TMC made:
(1) Remove the backing sheet on the double-sided tape without allowing the tape to touch the contact surface.
(2) Apply new double-sided tape to locations shown in the illustration after aligning the tape with the marking of the roof headlining.

NOTICE:
- Securely attach the No. 1 roof wire.
- Do not allow the No. 1 roof wire to sit loosely. Doing so may cause abnormal noise.

(c) for TMMK made:
(1) Remove the backing sheet on the double-sided tape without allowing the tape to touch the contact surface.
(2) Apply new double-sided tape to locations shown in the illustration after aligning the tape with the marking of the roof headlining.

NOTE: Securely apply the double-sided tape to prevent the tape from being out of alignment and peeling off.
(3) Attach the No. 1 roof wire along the double-sided tape so that the marking surface of the wire harness faces downward.
NOTICE:
- Securely attach the No. 1 roof wire.
- Do not allow the No. 1 roof wire to sit loosely. Doing so may cause abnormal noise.
(4) Apply adhesive tape to locations shown in the illustration.

(d) with Sliding Roof (Multi-panel Moon Roof Type):
(1) Remove the backing sheet on the double-sided tape without allowing the tape to touch the contact surface.
(2) Apply new double-sided tape to locations shown in the illustration after aligning the tape with the marking of the roof headlining.

NOTICE:
- Securely attach the No. 1 roof wire.
- Do not allow the No. 1 roof wire to sit loosely. Doing so may cause abnormal noise.

2. INSTALL RADIO ANTENNA CORD Installation

3. INSTALL NO. 5 ROOF SILENCER PAD (for TMMK Made)
(a) Remove the backing sheet on the double-sided tape without allowing the tape to touch the contact surface.
(b) Apply new double-sided tape to locations shown in the illustration after aligning the tape with the marking of the roof headlining.

(c) Align the markings on the roof headlining assembly with the No. 5 roof silencer pad and install the No. 5 roof silencer pad as shown in the illustration.

4. INSTALL ROOF SIDE RAIL SILENCER PAD (for TMMK Made)
(a) Align the markings on the roof headlining assembly with the roof side rail silencer pad and install the roof side rail silencer pad as shown in the illustration.

5. INSTALL FRONT ROOF SILENCER PAD (for TMMK Made)
(a) Align the markings on the roof headlining assembly with the roof silencer pad and install the roof silencer pad as shown in the illustration.

6. INSTALL ROOF HEADLINING ASSEMBLY

(a) without Sliding Roof:
(1) Engage the 3 clips and 2 fasteners and install the roof headlining assembly.
(b) with Sliding Roof (Standard Type):
(1) Engage the 3 clips and 2 fasteners and install the roof headlining assembly.
(c) with Sliding Roof (Multi-panel Moon Roof Type):
(1) Engage the 3 clips and 12 fasteners and install the roof headlining assembly.
7. INSTALL TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)
8. INSTALL TELEVISION BASE (w/ Rear Seat Entertainment System)
9. INSTALL SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof)
10. INSTALL VISOR HOLDER
11. INSTALL ASSIST GRIP SUB-ASSEMBLY
12. INSTALL LH VISOR ASSEMBLY
13. INSTALL RH VISOR ASSEMBLY
14. INSTALL MAP LIGHT ASSEMBLY
15. INSTALL RAIN SENSOR (w/ Rain Sensor) Installation

16. INSTALL ROOM LIGHT ASSEMBLY NO. 1
17. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
18. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
19. INSTALL ROOM LIGHT ASSEMBLY NO. 2
20. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
21. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
22. INSTALL ROPE HOOK
23. INSTALL REAR SEAT SIDE COVER LH
24. INSTALL REAR SEAT SIDE COVER RH
25. INSTALL DECK SIDE TRIM COVER LH
26. INSTALL DECK SIDE TRIM COVER RH
27. INSTALL REAR FLOOR FINISH SIDE PLATE LH
28. INSTALL REAR FLOOR FINISH SIDE PLATE RH
29. INSTALL REAR FLOOR FINISH PLATE
30. INSTALL DECK SIDE TRIM BOX LH
31. INSTALL DECK SIDE TRIM BOX RH
32. INSTALL BACK DOOR WEATHERSTRIP
33. INSTALL DECK BOARD SUB-ASSEMBLY NO. 3
34. INSTALL DECK BOARD SUB-ASSEMBLY NO. 2
35. INSTALL DECK FLOOR BOX REAR
36. INSTALL DECK FLOOR BOX FRONT
37. INSTALL TONNEAU COVER ASSEMBLY
38. INSTALL REAR SEAT ASSEMBLY LH Installation

39. INSTALL REAR SEAT TRACK BRACKET COVER
40. INSTALL REAR SEAT ASSEMBLY RH Installation

41. INSTALL REAR SEAT TRACK BRACKET COVER
42. INSTALL DECK BOARD SUB-ASSEMBLY
43. INSTALL CENTER PILLAR GARNISH LH
44. INSTALL CENTER PILLAR GARNISH RH
45. INSTALL CENTER PILLAR GARNISH LOWER LH
46. INSTALL CENTER PILLAR GARNISH LOWER RH
47. INSTALL FRONT PILLAR GARNISH LH
48. INSTALL FRONT PILLAR GARNISH RH
49. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
50. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
51. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
52. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
53. INSTALL REAR DOOR SCUFF PLATE LH
54. INSTALL REAR DOOR SCUFF PLATE RH
55. INSTALL FRONT DOOR SCUFF PLATE LH
56. INSTALL FRONT DOOR SCUFF PLATE RH
57. INSPECT SLIDE ADJUSTER LOCK Installation