Scan Tool Testing and Procedures

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. READ DATA LIST
HINT: Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

(a) Connect the intelligent tester with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DATA LIST.

MASTER SW:





HINT: *: Driver door only

BODY:









HINT:
- *1: w/o Power back door system
- *2: Master switch, door control switch, transmitter switch or key-linked switch.

BACK DOOR:





HINT: *: "RATCHET" appears on the display of the intelligent tester, however, the name of the part corresponding to the display of the tester is "half-latch".

2. PERFORM ACTIVE TEST
HINT: Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

(a) Connect the intelligent tester with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST.

BODY: