Power Source Circuit

MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): Power Source Circuit

Power Source Circuit

DESCRIPTION

This is the power source circuit for the outer mirror control ECU.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT OUTER MIRROR CONTROL ECU (POWER SOURCE)





(a) Disconnect the R26 (R27) connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Outer mirror control ECU LH:
Standard voltage






Standard resistance






Outer mirror control ECU RH:
Standard voltage






Standard resistance






NG -- REPAIR OR REPLACE WIRE HARNESS
OK -- REPLACE OUTER MIRROR CONTROL ECU