Removal

2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL RH
2. SEPARATE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
3. REMOVE FRONT FENDER APRON SEAL RH
4. REMOVE ENGINE ROOM COVER SIDE Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE V-RIBBED BELT






(a) Using SST, release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.
SST: 09249-63010






(b) While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner.