Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal

4. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY






(a) Disconnect the connector from the driver side knee airbag assembly.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 4 bolts and the driver side knee airbag assembly.